1. Remove the old covering and clean up the surface.		2. Cut green line as above image.
3. use sharp knife.
4 peel off the skin from the backing paper.		5. Prepare tap water and paint brush.
6. lay it out with the adhesive side up. Using a cotton swab or paint brush, apply tap water to the adhesive. tap water delays the adhesion and allows you time to position and adjust the skin.		7. Start positioning the cover by sliding under the self timer lever.
8. Position the hole skin with stick.		9. Adjust the skin before the tap water get dry.
10. Apply another side.		11. Finished.