Please rotate self-timer in anticlockwise direction and take it out.
How to apply Canon Demi EE17's coverings
(for non-glued leather)
| 1 | 2 | |
|
|
|
| Please remove the original vulcanite. | Please rotate self-timer in anticlockwise direction and take it out. |
|
| 3 | 4 | |
|
|
|
| Prepare clear liquid type bond. If you want this type, please add 2 USD, I will enclose it with coverings. | Rub bond on reverse side. | |
| 5 | 6 | |
|
|
|
| Spread bond liquid, from edge to edge. | Rub bond liquid on camera body. | |
| 7 | 8 | |
|
|
|
| Please rub bond only red portion. | ||
| 9 | 10 | |
|
|
|
| Wait 5 to 10 minites until bond get dry. | Start applying after bond get dry. | |
| 11 | 12 | |
|
|
|
| Apply slowly with positioning the place. it does not adhere immediately, you could restick easily. | ||
| 13 | 14 | |
|
|
|
| Done. | Please rub the bond in the same way. | |
| 15 | 16 | |
|
|
|
| In the case of this portion, plesae do not rub bond on the camera body. | Apply from the lens portion. | |
| 17 | 18 | |
|
|
|
| You could see like this. | Please prepare flathead screwdriver. | |
| 19 | 20 | |
|
|
|
| Squeeze into the chasm with flathead screwdriver. | Done. | |
| 21 | 22 | |
|
|
|
| Please rub the bond in the same way. | As for the backside of camera body, rub bond only red portion. | |
| 23 | 24 | |
|
|
|
| after the bond gets dry, please apply slowly. | ||
| 25 | 26 | |
|
|
|
| Done. | I guess you can find overspilled bond. | |
| 27 | 28 | |
|
|
|
| You can clean up overspilled bond with cotton swab dipped alcohol. | Finished. | |